SMM0012 Multi-Process Welding Machine Mig-Mag/Saee and Arc Air (Gtaw/Gmaw/Smaw/Cag) CNC Machine Tools Didactic Equipment Teaching EquipmentTIG welding is not supported.
CE compliant certificate
All processes: EE, TIG, MIG/MAG, Flux-Cored Wire, Gouging, with advanced welding modes and the ability to weld in HF TIG and AC/DC TIG with integrated wire feeder, wire speed: 1 to 18 m/min minimum.
Three-phase power supply 400V ±10% 50Hz.
Minimum duty cycle in GTAW-GMAW-FCAW mode: 300A at 100% and 280A at 100% in SMAW mode.
Average welding current: 5A to 350A minimum
Advanced user interface: High-resolution 7-inch minimum display, voltage display, synergistic voltage display, wire speed/current display; wire speed/current and voltage adjustment.
Water-cooled
Preset settings for all parameters.
Controlled short-circuit mode: dynamic short arc, STT, CMT, cold arc, cold process, superpulse, RMD, Smart Pulse.
Ground cable with grounding pin, minimum length 4.5m
Drive roller kit, 0.9/1.2mm diameter, with intermediate wire guide for solid, flux-cored, and aluminum wires.
Foot pedal to increase current. The foot pedal allows you to reach the maximum set current. Minimum 7.5m. Flexible welding cable, minimum 3m long, with electrode holder
Complete package: 150A TIG torch (minimum 60% power consumption when air-cooled), minimum 3m cable length
300A MIG torch (minimum 60% power consumption, CO2), wire diameter: minimum 0.8 to 2mm, minimum 4.5m cable length
Air Arc torch, current range: 500A
User manual in French and English.
